Qingdao Cuishi Machinery Co., Ltd. specializes in making full-automatic metal bellows machines. On average, one machine is delivered every day, which is in short supply and has been highly praised by market customers
The machine is widely used in highway bridges and is highly praised by customers in Yunnan, Guizhou, Sichuan, Henan and Hebei
Name | LOGO | Specification |
Automatic prestressed metal bellows equipment
Automatic unwinding, Siemens PLC touch screen control, sinusoidal frequency converter, 15kw motor, automatic cutting, unloading, far infrared control, excluding mold | WY | 78 steel strip
Four wave design |
2.mould | WY | 40,45，50，55，60，65，70，75，80，85， 90，95，100，105，132mmm |
3.welding machine | WY |
Configuration list of prestressed metal bellows production equipment
As an industry benchmark, the following are our advantages
1. Full automatic Siemens touch screen control system, winding and belt feeding, cutting and unloading, control sawing, automatic speed reduction, automatic cutting and automatic speed increase, automatic unloading, can be made into a shelf, the material can
be automatically unloaded into the shelf, and the crane can be hoisted directly when it is full. If it is cut manually for half a minute, it will be cut once, which is especially labor-intensive
Our speed is about 20 meters per minute, 10000 meters in 8 hours, four wave design
We use 78 steel strip, not 36 steel strip. It is light in weight and fast in speed. The four ripple design is easy to control and debug. It helps customers save about 1 ton of material every day. For example, a roll of steel strip weighs 350 kg and has an inner diameter.
of 500. We have infrared sensing device. If there is no steel strip, we will stop automatically. The workers can connect the steel strip with our electric welding machine, and the skilled workers will complete the operation within 10 minutes
For length cutting, we have a travel switch on the reversing table. For example, everything in 10 meters will be cut automatically in half a minute
Our special high wear-resistant materials for molds, normalizing, tempering, quenching and tempering, quenching and tempering, more than 1 million meters We have more than 0.3 thick belt, and there is an additional feeding motor next to the belt feeding
Meter weight is light, which can save customers nearly 1 ton of material in a day. Taking 85mm weight per meter as an example, the customer used to design 765G before, but now our machine is 645g, saving 120g steel belt per meter Taking 55mm as an example, the weight of the meter produced by our machine is 397G, which saves 100g. Considering all specifications, the average material saving is 12.5% per meter, and the production speed is 2.5 times faster. The time for changing the mold and discharging the pipe is about 20 minutes, the wave height below 95mm is more than 2.5mm, and the diameter above 100mm is 3mm
