plastic single wall corrugated pipe machine
flexible electrical conduit water tube hose
single wall pvc pp pe plastic corrugated pipe machine
The below are video 1 90mm diameter
Video 1 : https://youtu.be/04qOMyb4lbw
Video 2 : https://youtu.be/B8ggVDQft8c
1. plastic single wall corrugated pipe machine can produce PP PE PA PVC EAV corrugated pipe which is widely used as wire harness protective pipe for car and machine tool
2. equip with vacuum pump, the machine can produce washing machine pipe, air conditioner pipe, hookah pipe, wash basin drain pipe,medical pipe
3.mold transmission by gear
4. water cooling, wind cooling
Product Paramenters
model | pipe diameter | extruder model | motor powder | production speed | mold pairs | optional vacumm pump |
CS-14 | 5-14mm | SJ-45 | 11kw | 6-8m/min | 42 | |
CS-32 | 10-32mm | SJ-50 | 15kw | 5-12m/min | 50 | 1.5kw |
CS-50 | 16-50mm | SJ-65 | 30kw | 3-10m/min | 50 | 2.2kw |
CS-63 | 16-63mm | SJ-65 | 30kw | 3-10m/min | 50 | 2.2kw |
CS-110 | 32-110mm | SJ-75 | 37kw | 3-6m/min | 72 | 5.5kw |
PE PP PVC Single Wall Corrugated Pipe Production Line
Single wall corrugated pipe has features of high temperature resistance, anti-erosion, anti-abrasion and high strength.
This pipe widely be used in fields of auto wire, electric thread-passing pipes, circuit of machine tool, protective pipes of lamps and lanterns wire, tubes of air conditioner and washing machine.
PE/PP/PVC Single Wall corrugated pipe production line consists of Single Screw Extruder, Mold Blocks, Corrugated Forming Machine, automatic Winder. It can continuously produce different diameter.
Application
1. Electrical wire conduit pipe
2. Automobile wire harness tube
3. Shisha hookah pipe
4. Washing machine drain hose
5. Air conditioner outlet pipe
6. Medical breathing tube
7. Extension tube
PE PP single wall corrugated pipe production line
SJ50/30 Single screw extruder
single screw extruder.
1. product material: PP PE PA EVA PVC garanule
2. extruder model: SJ45 SJ50 SJ65 SJ75
3. motor power: 11-37kw
4. motor brand: SIEMENS
5. inverter brand: ABB
6. temperature controller brand: OMRON
7. heater material: cast aluminum
8. vacuum loading device: included
9. hopper dryer: include
Item | Description | Unit | SJ50/30 |
| |||
1 | Screw diameter | mm | 50 |
2 | L: D | 30:1 | |
4 | Brand motor | Domestic brand | |
5 | Motor speed adjusting mode | Frequency conversion | |
6 | Inverter | Holip /delta /ABB | |
8 | Extrusion output | Kg/h | 50-75 |
9 | Material of screw and barrel | 38CrMoAlA,Nitrogen treated | |
10 | Nitrogen depth | mm | 0.5-0.8 |
11 | Heating power | KW | 4 zones, 14kw |
12 | Cooling power | KW | 4 zones, 250w×4 |
13 | Gear box | Hard gear surface, low noise design | |
Die head & forming machine & forming mould
forming machine
1. forming type: blowing
2. cooling type: water and wind
3. fan quantity: 4 sets or 6 sets or 8 sets
4.lubricant: oil
5. transmission: gear
6. application: wire harness protective pipe for car or machine tool
Die head
| ||
1 | Die head material | 40Cr |
2 | Inner structure | Spiral type |
3 | Melt pressure meter | Equip with a pressure meter to monitor the melt pressure in the die head |
Forming machine & forming mould vacuum forming machine 1. forming type: vacuum 2. cooling type: water and wind 4. lubricant: oil
| ||
1 | Material of forming mould | 40Cr, nitrogen treated |
2 | Forming mould | 1 set |
3 | Quantity of mould block | 42 pairs |
4 | Forming machine type | Horizontal type |
5 | Forming mould moving way | Circle |
5. Double disk winder
Item | Description | Unit | SPS63 |
| |||
1 | Rolling diameter | mm | 400mm |
2 | Winding speed | / | 0.5-12m/min |
3 | Maximum Winding diameter | 2.2m | |
4 | Winding width | / | 0.4-0.6m |
5 | Pipe range | m/min | 16-32mm |
6 | Automatic pipe displacement device | mm | Y132S-4 |
7 | Air pressure | 0.3-0.6Mpa | |
8 | Mode of discharging pipes | / | Pneumatic drive |
