Technical Specification of COD Cable Pipe Production Line
Inner pipe production line
I. SJ-65/30 single screw extruder 1 set
This extruder is mainly used for the extruding of pipes and it is equipped with a hard tooth surface speed reducer, both the gear and the axis are made of alloy steel and have been processed by nitriding and grinding. The material of the screw and the charging barrel is 38CrMoALA with nitrogen treatment. The screw adopts special type protective screen plasticization panel, it has autoregulation digital display switchboard and a Siemens contactor. The temperature control meter is RKC made in Japan. Its main engine is frequency controlled and it is equipped with an automatic charging machine.
Main technical parameter:
Screw diameter: ф65
L/D：30:1
Rotate speed of the screw:10-100r/min
Extruding output(max):80-120kg/h
Heating power:22KW
Main engine power:37KW
High-speed extruding Die head
It is made of high-quality die steel, it has a high degree of accuracy and a long life-span. It has three coextruding flow passage and a spiral structure so it has the quality of high speed, even extruding and low pressure of the die head.
COD 110 mm inside 5 sub-duct ( 5 x 33 mm/28mm ) with PP rope 6 mm
2. COD 110 mm inside 3 sub-duct ( 3 x 42 mm/38mm ) with PP rope 6 mm
3. COD 110 mm inside 4 sub-duct ( 4 x 38 mm/32mm ) with PP rope 6 mm
4. COD 110 mm inside 7 sub-duct ( 7 x 29 mm / 25mm ) with PP rope 6 mm
5. COD 77 mm with Three Sub-duct inside
IV. SGZJ-75 Vacuum-sized Water Trough
This machine is mainly used for the sizing & cooling of the pipes. It is equipped with a vacuum air pump and water pump system used for sizing and cooling. The water pump uses the circulating water inside the box, both the supplying and draining of water are controlled by valves. It is equipped with a device that can adjust fore and aft, left and right, high and low so that it realizes 3D adjustment. The main parts of the machine are made of stainless steel so the quality of the circulating water is improved.
Main technical parameter:
Length of the vacuum box:6000mm
Vacuum air pump power:4KW
Water pump power:3KW
Mobile motor power:0.75KW
Cooling way:spray-type water cooling
SGPL-75 Spray Water Trough
This machine is mainly used for a second spray cooling of the pipes.
Main technical parameter:
Length of the vacuum box:6000mm
Water pump power:3KW
Cooling way:spray-type water cooling
VI. SLQ-75 Hauling Machine
This machine is mainly used for the moulding and hauling of the pipes, the hauling motor is frequency controlled and the transducer is Fuji made in Japan.
Effective hauling length: 800mm
Number of the pedrail:2
Hauling speed:0.3-18m/miu
Hauling motor power:2.2KW
VII. SGJQ-2000 Coiling Machine
The machine is mainly used for the coiling of the pipes. It adopts memental coiling.
Main technical parameter:
Output torque:10N.M
Coiling diameter(max)：φ2600mm
Coiling meter :1000m
The cod pipe coating pipe line
II.Co-extrusion Line for the outside pipe with five pipes
Unload pipe table 7 sets
Guiding Device( guiding pipes go into the combined extruder) 7 sets
Combined System: 1 unit
