Polypropylene plastic PP Sheet/ board
PP looks like PE, but PP is more transparent, lighter. PP is flammable. PP own low water absorption, low gas permeability. PP has good mechanical properties, the tensile strength and yielding strength are better than PE, PS and ABS. PP resists stress cracking and easy to weld, but low notched impact strength,
. Resistance to bending fatigue. Good heat resistance
2. High tensile , surface strength
3. High chemical resistance
Disadvantages
1. Low oxidation ,abrasion resistance
2. Easy to brittle at low temperature
3. HF-welding not possible
4. Difficult to varnish and glue
5. No weather resistance
SJ130-35PP /PE Sheet production line Specification
1、Component Production Line
Item | Name | Model | Qty | Remarks |
1.1 | Single Screw Extruder | SDSJ130x35 | 1Set | With automatic loader |
1.2 | Single Screw Extruder | SDSJ90x35 | 1Set | With automatic loader |
1.3 | Electrical control system | 1Set | ||
1.5 | Hydraulic unit &Filter | 1Set | ||
1.6 | Coat-hanger type Board mould | SDMJ-2300 | 1Set | |
1.7 | 3 roller calender | SDSG-2400 | 1Set | |
1.8 | Cooling bracket | SDTJ-9000 | 1Set | |
1.9 | 2 roller haul off | SDQY-2400 | 1Set | |
1.10 | Board cutting machine | SDQG-2400 | 1Set | |
1.11 | Automatic stacker | SDCS-2400 | 1Set |
2、General Introduction
Item | Description | Parameters |
2．1 | Use material | PP、PE |
2．2 | Production line speed | 1-6m/min |
2．4 | Max. output | 600kg/h |
2．5 | Overall dimensions | 26×3.5×3 L×W×H |
2．6 | Weight(Approx) | ≈16T |
2．7 | Total installed power | 300kw |
2．8 | Actual energy consumption power | 145kw |
2．9 | Gas consumption | 0.4m3/min |
2．10 | Air pressure | 0.6mpa |
2．11 | Water cycle | 2m3/min |
2．12 | Power | AC380V±10%,50HZ |
2．13 | Water supply | Water used for industry, no impurities, by filtrating, water pressure: 0.4mpa water temperature14～25 |
2．14 | Work environment temperature | 0-40℃ |
3、Technical parameter
3.1 SDSJ-130x35 Single Screw Extruder
Screw diameter | 130mm |
Screw L/D | 35:1 |
Screw frame | new model high activity screw |
Barrel screw material | 38CrMoAIA nitriding treatment |
Nitriding layer thickness | 0.4-0.7mm |
Screw hardness | HV＞740 |
Barrel hardness | HV＞940 |
Screw rotate speed | 90rpm |
AC motor power | 160kw； |
3.2 SDSJ-90x33 Single Screw Extruder
Screw diameter | 90mm |
Screw L/D | 35:1 |
Screw frame | new model high activity screw |
Barrel screw material | 38CrMoAIA nitriding treatment |
Nitriding layer thickness | 0.4-0.7mm |
Screw hardness | HV＞740 |
Barrel hardness | HV＞940 |
Accuracy of temperature control | +/-1 degree |
Extrusion output | 180-220kg/h |
Speed reducer | hard gear surface speed reducer |
Installating mode | vertical installation |
Gear material | 20CrMnTi through cementite and quenching ,hardness HRC58-62 degree |
Cooling mode | through chiller cycle water cool gear |
Vacuum loader | |
Model | SJ-U/100kg |
Loading mode | automatic absorbing ,control time |
Loading output | 400kg/h |
Motor power | 0.75kw |
Dryer | automatic temperature control hot wind |
Effective volume | 80kg |
Heating power | 1.5kw |
3.4 Elecric controlling system
Temperature Control Meter | Omron/Taida |
Frequency Converter | ABB conversion velometer |
Contactor | SIMENS contactor. |
3.5 Hydraulic screen changer
Type | hydraulic fast screen changer |
Max pressure of melt | 20-50Mpa |
This device is made of whole alloy steel; shift steel plate is made of cement steel | |
3.6 Coat hanger type panel mould
Mold modality | ABA/AB，With distributor |
Mold Material | Die-quality forged steel, with hard chromium plating, polishing treatment |
Equipped with coat hanger type die | product thickness 2-20mm there have plate the two sides, could adjust the width 1/4. |
Effective width of mould | 2300mm |
Adjustable width (Ready product) | 1500-2000mm |
This die flow channel is coat hanger type gradual change flow channel ,die adopt high quality alloy steel 40CrMo.chrome and polishing for surface.mould lip adjusting ,down mould lip can be changed | |
3.7 3 Roller calendar
uyi
Calendering roller dia | Φ500mm |
Roller treatment | mirror treatment |
Surface accuracy | R0.2 |
Roller material | 40CrMo |
Chrome thickness | 0.07-0.1mm |
Roller effective length | 2400 mm |
Drive motor power | 1.5kw×3 |
Roller line speed | 0.25-3m/min |
Equipped with roller constant temperature system | |
This machine adopt 3 mirror roller independence driving ,drive reducer adopt ABB transducer which realize stepless speed regulating ,with high precision to overcome error produced by machine driving ;3 roller independence driving mode is the mode of the highest precision .which can make sure that running precision cannt change with the changing of roller diameter..the space between the up and down roller is controlled by worm wheel and worm. manual and reducer motor driving adjusting ;to equipped with up and down limit system, roller equipped with heating constant temperature system,
3.8 Cooling bracket SDTJ-9000
Length | 9000mm |
Stainless steel roller length： | 2400mm |
Trimming device | 2 Sets of tools |
3.9 4-Roller haul off SDQY-2400
Drive reducing motor power | 4kw |
Speed control | ABB Inverter |
Rubber roller quantity | 2 pairs |
Haul speed | 0.2-3m/min |
Control mode | Pneumatic |
Transmission mode | Double row chain drive |
3.10 Board cutting machine
This is a universal cutting machine for blades and electric saw blades.It also has the function of dust suction.
Sheet size: | Cut according to setting length, the max. width of sheet: 2000mm |
Drive unit: | 0.75KW AC Brake motor |
Cutter lifting unit: | Pneumatic |
Valid cutting width | 2400mm |
Number of blades: | 3 pic |
Saw blade | High strength alloy saw blade, diameter 400mm |
Vacuum motor power: | 4kw |
Cutting mode: | automatic meter countering and cutting |
Meter counter: | encoder meter counter, Autonics from Korea, automatic countering |
Electrical control unit: | length counter signal control, both manually and automatic working |
3.11 Automatic stacker
Mobile motor | Servo motor control |
Grasping mode | sucker |
Lifting mode | RV reducer control |
Reducer model | RV130 |
Motor power | 2.2kw |
Maximum Grab Weight | 450Kg |
Electrical control system | PLC |
