Configuration of wood flour production line
1.Technical parameters
1. Name: grinding production line
2. Model: mfx-6345dr
3. Applicable materials: sawdust, shavings, etc
4. Moisture content of raw materials: less than 30%
5. Fineness of finished product: 60 mesh
6. Moisture content of finished product: about 13%
7. Output of finished products: 200-300kg / h
8. Total power of equipment: 193kw
9. Total height of equipment: 6-7m
(NO.) |
(Name) | (Model) | kw (Power) |
(Q’ty) |
(Remarks) | |
Coarse crushing system | ||||||
1 |
Belt conveyor
| PD-500 | 1.5Kw | 1 | ||
2 | crusher
| PS-90 | 11Kw | 1 | 11kw main motor, thickened casing, can break wood chips and small wood blocks, and the screen size is 8mm | |
3 |
Shaclone
| CTZ-600 | ||||
4 | duster
| |||||
Total | 12.5Kw | |||||
Drying system | ||||||
1 | Screw conveyor | LXU-220 | 1.5kw | 1台
| Control feeding speed and diameter: Φ 220mm, conveying length: 3000mm, speed: frequency conversion control | |
2 |
Hot blast stove | DQL-260 | 105w | 1台
| Electric heating, built-in 7 groups of heating tubes, which can be switched separately according to the moisture of the material | |
3 |
Drying pipe
| BDCC-260 | 1套
| Material: carbon steel 2mm diameter: Φ two hundred and sixty | ||
4 | cyclone separator | XFL-780A | 1台
| Separate the material from the wind. Diameter: Φ seven hundred and eighty | ||
5 | Drying fan | 15kw | 1台
| Transportation of materials and wind power. Total pressure: 5000Pa flow: 8000m3 / h speed: 1400R / min material: 65Mn wear-resistant thickened plate is adopted for impeller and side wall plate, and the thickness of impeller plate is 6mm | ||
6 | Air flow pulser | JY-GZ260 | 1
| Reduce wind speed and dust, which is conducive to material collection. diameter Φ 520mm high 2100mm material: carbon steel 2mm | ||
7 | Control system | 1
| There are three basic protections for the motor. The inverter is delta brand, and the electrical components are Chint | |||
Total | 122.25Kw | |||||
Grinding system | ||||||
1 | Quantitative feeder | LX-220 | 1.5kw | 1台 | Control the feeding speed to realize the uniform and continuous feeding of materials into the pulverizer. Diameter: Φ 220mm conveying length: 4300mm | |
2 | Miller | MFS-6345 | 45kw | 1台 | Grinding host, spindle rotation: 2900r / min, number of blades: 64 single hole blades, crushing cavity width: 450 material; Q235A bearing brand NSK | |
3 | cyclone separator | CXC-800 | 1台 | Separate the material from the wind. Diameter: Φ 800mm | ||
4 | Turn off the fan
| ZGF-10 | 0.75Kw | 1台 | Turn off the wind to reduce the wind loss and separate the air force from the material. Rotating speed: 33r / min unloading capacity: 10L / rpm | |
5 | Fan | LXF-9-26 | 11kw | 1台 | Total pressure: 5200a flow: 6000m3 / h speed: 2900r / min | |
6 | Duster | 16筒 | 1台 | Control dust and make the working environment clean. cloth bag: Φ 160*2000*16 | ||
7 | Screening machine | QXS-460 | 5.5kw | 1台 | This equipment is required for more than 80 meshes, with double-layer screen and stainless steel screen | |
8 | Air duct | 1套 | Carbon steel diameter 220mm. | |||
9 | Control system | 1台 | The basic three protections of the motor, and the electrical components are Chint | |||
Total | 58.25Kw | |||||
193kw | ||||||
